How To Fix A Leaking Geyser

A leaking geyser can lead to significant water damage and increased utility bills, so it’s important to address the issue promptly. While some repairs might require a professional, there are several steps you can take to troubleshoot and possibly fix the leak yourself. Here’s a guide on how to fix a leaking geyser.

1. Identify the Source of the Leak

The first step is to pinpoint where the leak is coming from. Common areas to check include:

• Connections and Fittings: Inspect all pipes and connections leading to and from the geyser for signs of moisture or corrosion.
• Pressure Relief Valve: This valve, which prevents excessive pressure buildup, can sometimes leak if it’s faulty or if there’s too much pressure in the system.
• Tank: Look for signs of rust or cracks on the geyser itself, as these could indicate a more serious problem.

2. Turn Off the Power and Water Supply

Before attempting any repairs, ensure your safety by turning off the power supply to the geyser. If it’s electric, switch off the circuit breaker. For gas geysers, turn off the gas supply. Next, turn off the water supply to the geyser to prevent further leaking during repairs.

3. Tighten Connections

If you’ve identified the leak as coming from a connection or fitting, try tightening any loose connections with a wrench. Be careful not to over-tighten, as this could cause damage. If the leak persists after tightening, you may need to replace the washers or fittings.

4. Inspect and Replace the Pressure Relief Valve

If the pressure relief valve is leaking, it may need to be replaced. First, carefully unscrew the valve and check for any signs of wear or damage. If you find any, purchase a replacement valve from a hardware store. Follow the manufacturer’s instructions to install the new valve, ensuring all connections are secure.

5. Address Tank Leaks

If you discover that the tank itself is leaking, this can indicate a more serious issue, such as corrosion or a crack. Unfortunately, if the tank is severely damaged, it may be best to replace the geyser entirely. If the damage is minor, you can use a sealant specifically designed for water tanks to temporarily patch the leak. However, this is usually a short-term solution.

6. Check the Temperature and Pressure Settings

Sometimes, leaks can occur due to excessive pressure buildup inside the tank. Check the temperature and pressure settings on your geyser. Ideally, the temperature should be set between 120°F (49°C) and 140°F (60°C) to prevent overheating. If the pressure is too high, consider installing a pressure-reducing valve.

7. Monitor for Further Issues

After making repairs, turn the water supply back on and check for any signs of leaks. Allow the geyser to fill up and run for a bit while observing the connections and the tank. If the leak has stopped, congratulations! If you notice continued leaking, it may be time to call in a professional plumber.

8. Consider Regular Maintenance

To prevent future leaks, schedule regular maintenance for your geyser. Flushing the tank annually can help remove sediment buildup, which can lead to leaks and damage. Regular checks on the pressure relief valve and connections can also help catch problems early.

Also Read: How To Groom For A Formal Job Interview