How To Test Glow Plugs
Glow plugs are essential in diesel engines because they help heat the combustion chamber, making it easier to start the engine in cold conditions. When glow plugs fail, the engine may struggle to start, misfire, or produce excess smoke. Learning how to test glow plugs ensures your diesel engine remains reliable and efficient. Here is how to test glow plugs.
- Gather the Right Tools
To test glow plugs, you will need a digital multimeter, a basic socket set, and in some cases a test light. Having the right tools makes the process accurate and prevents unnecessary damage to the plugs or engine components.
- Ensure Safety First
Turn off the engine and allow it to cool before testing. Disconnect the battery to avoid electrical shocks or short circuits. Safety should always come first when working with engine components.
- Locate the Glow Plugs
Open the engine cover and identify the glow plugs, which are usually found on the cylinder head near each injector. They often look like small metal rods with wires connected to them. Refer to your vehicle’s manual if unsure of their exact location.
- Perform a Resistance Test
Set your multimeter to the ohms setting. Disconnect the wire from the glow plug, then place one probe of the multimeter on the top terminal of the plug and the other on a good ground. A healthy glow plug typically shows a low resistance reading between 0.5 and 2 ohms. A very high or infinite reading usually means the plug is faulty.
- Check for Continuity
Another way to test is by checking continuity with the multimeter. Place one probe on the glow plug terminal and the other on the plug’s body. If the multimeter beeps or shows continuity, the glow plug is functional. No reading indicates it is defective.
- Use a Test Light (Alternative Method)
If a multimeter is not available, you can use a 12-volt test light. Connect the test light clip to the positive battery terminal and touch the probe to the glow plug terminal. If the light glows, the plug is working; if not, it needs replacement.
- Replace Faulty Glow Plugs
If any glow plugs show incorrect readings or fail the test, replace them with new ones of the correct specification for your engine. Always replace faulty plugs promptly, as weak glow plugs can affect performance and make cold starts difficult.
Also Read: How To Sleep With A Kidney Stent