Threading a sewing machine is a fundamental skill for anyone interested in sewing. Though it may seem daunting at first, it becomes easy with practice. Proper threading ensures smooth stitches and prevents issues like tangled thread or skipped stitches. This guide explains the step-by-step on how to thread a sewing machine efficiently.
- Turn Off the Sewing Machine
For safety, switch off the machine and unplug it from the power source. This reduces the risk of accidental operation during threading. - Raise the Presser Foot
Lift the presser foot lever to release the tension discs. This ensures the thread can pass through smoothly when you thread the machine. - Wind the Bobbin (If Needed)
If your bobbin isn’t already wound with thread, place an empty bobbin on the bobbin winder spindle. Run the thread from the spool pin through the threading guide for the bobbin winder and onto the bobbin. Engage the bobbin winder and press the foot pedal to fill the bobbin with thread. Once filled, remove it and trim the excess thread. - Insert the Bobbin
Open the bobbin compartment, usually located beneath the needle plate. Place the bobbin into the bobbin case, ensuring the thread unwinds in the correct direction as specified in your machine’s manual. Pull the thread through the slit or guide and leave a small length of thread exposed. - Position the Thread Spool
Place your thread spool on the spool pin, ensuring it is secure with the spool cap to prevent it from moving or slipping during sewing. - Guide the Thread Through the Machine
Pull the thread from the spool and follow the threading path marked on your machine. Typically, this involves:- Passing the thread through the thread guide near the spool pin.
- Pulling it down through the tension discs.
- Bringing it up through the take-up lever, ensuring the lever is at its highest point.
- Guiding it through any remaining thread guides down to the needle.
- Thread the Needle
Cut the end of the thread at an angle for easier insertion. Pass the thread through the eye of the needle from front to back. Use a needle threader if your machine has one or if threading by hand proves difficult. - Pull Up the Bobbin Thread
Hold the upper thread with one hand while turning the handwheel towards you with the other. The needle will lower and then rise, pulling the bobbin thread up through the needle plate. Gently pull both threads out and place them behind the presser foot. - Test the Machine
Before starting your project, sew a few stitches on a scrap piece of fabric to ensure the threading is correct and the stitches are even. Adjust tension settings if necessary.
Also Read: How To Style Relaxed Hair With Gel